Thiamethoxam 22.6% + Difenoconazole 2.2% + Fludioxonil 2.2% FS

Technical Requirements for Use:

1. Seed Coating Method for Wheat, Peanuts, and Garlic: Measure the recommended dosage of the agent according to the sowing rate, dilute with an appropriate amount of water, and stir evenly to form a slurry (the slurry-to-seed ratio is 1:50-100, i.e., 100 kg of seeds corresponds to 1-2 liters of slurry). Pour the seeds into the slurry, stir thoroughly, and allow to dry before sowing.

2. Seed Coating Method for Corn: Dilute the agent according to the recommended dosage at a slurry-to-seed ratio of 1:50-125 (i.e., 100 kg of seeds corresponds to approximately 0.8-2 liters of slurry). Stir thoroughly with the seeds until the solution is evenly distributed on the seed surface, and allow it to dry.

3. Seeds used for treatment should meet national standards for improved varieties.

4. The prepared solution should be used within 24 hours to avoid precipitation.

5. When applying this product on large-scale new varieties of the above-mentioned registered crops, a small-scale safety test must be conducted first.

6. Preparation of the agent and seed treatment should be carried out in a well-ventilated area. After seed treatment, thoroughly clean protective equipment.

7. Seed treatment techniques or methods should reduce dust generated during application, packaging, and sowing. It is recommended to use a pneumatic seeder with a guide plate.

8. Treated seeds must be placed in clearly labeled containers. Do not store them with food or feed, and do not feed them to poultry or livestock, nor use them to process feed or food. After sowing, the seeds must be covered with soil, and unauthorized personnel and livestock are strictly prohibited from entering the area.